Pre-Configuration Planning
976-0043-01-02 2–3
❐Renewable energy systems (e.g., P V arrays, wind turbines etc.)
See “System Input Requirements” on page2–4 f or more information.
Location What are the safe, physical environmental requirements for your
installation:
❐Mounting location for optimal performance and easy access of all
components
❐Ventilation and clearance requirements for all compone nts
❐Mounting method (wall or shelf)
❐Additional items/materials required for mounting
❐RFI or EMI considerations
See “Location Considerations” on page2–5 for additional information.
Grounding What methods of protection and grounding are required:
❐Grounding type (i.e., ground bar, ground bus, or ground rod)
❐Neutral-to-ground bonding requirements
❐Lightning and surge protection
See “Grounding Considerations” on page2–7 for additional information.
Battery What kind of DC storage will be used:
❐Battery type and size
❐Battery cables and sizes
❐Size of the battery bank and it’s configuration
❐Location of battery bank to rest of system
See “Battery Considerations” on page2–11 for additional information.
Wiring What is needed/required for the AC and DC wiring for this installation:
❐Types and sizes of wires needed
❐Types and sizes of conduits needed
❐Types and sizes of fuses, disconnects and/or circuit breakers
❐Additional equipment for code compliance (e.g., service panels,
conduit boxes, emergency shutoff switches etc.)
❐Wire routing
See “Wiring Considerations” on page2–18 for additional information.