3.If applicable, select a language for the administrative installation (not necessary if setup language was specified in the command line).
4.During installation, specify a target network location for the administrative image to be created.
5.Share this location (Software Distribution Point).
Software components and their installer locations for the Special Edition:
| Software component | Installer location on the | Command |
1 | PaperPort 10.0 SE | PP10SE\PaperPort | SETUP /A |
2 | OmniPage SE 3.0 | OPSE3\OmniPage | SETUP /A |
3 | Image Retriever 5.2 SE | IR\English | SETUP /A |
|
| IR\French |
|
|
| IR\German |
|
|
| etc. |
|
Software components and their installer locations for the Professional Edition:
| Software component | Installer location on the | Command |
4 | PaperPort Professional 10.0 | PP10PRO\PaperPort | SETUP /A |
5 | OmniPage Pro 14.0 Office | OP14OFFC | SETUP /A |
6 | Image Retriever 5.2 Pro | IR\English | SETUP /A |
|
| IR\French |
|
|
| IR\German |
|
|
| etc. |
|
7 | PDF Create! 2.0 | PP10PRO\PaperPort\PDFCreate | COPY |
8 | PDF Converter 1.3 | OP14OFFC\OmniPage\PDFConv | MSIEXEC /A |
Note
Do not perform an administrative installation for PDF Create! 2.0. Instead, simply copy its installer onto the target network location.
9 of 17
