Xerox 255 manual Go to the workstations, Windows for Workgroups Users, Workstations

Microsoft Windows (NetBEUI) Peer-to-Peer Networks Quick Install Card Xerox Document Centre 240/255/265 LP/ST

c)OPTIONAL STEP: Press the Printer Description button, using the Touch Screen keys, enter the desired text for this item then press Save.

d)Press the Connections button.

7.Set Maximum Connections and Timeout

a)Touch the Maximum Connections soft button on the touch screen and on the keypad enter the desired maximum connection number between 1 and 30. It is recommended that this value should be set at the default.

b)Touch the Connection Timeout soft button on the Touch Screen. On the keypad enter the desired number of second between 0 and 9999. Press Save to exit the Connections Screen.

c)Press the Exit Tools button.

8.Wait a MINIMUM of 7 minutes for the printer to reset.

9.Obtain a Configuration Report from the printer to use in the remainder of the installation.

10.From the documentation package supplied with your printer, retrieve the CentreWare Network Services CD-ROM and the document entitled Getting Started with Print and Fax Services. Proceed to the

next section of this procedure called Go to

the workstations and.

Go to the workstations and...

11. Verify that the NetBEUI protocol is loaded (ALL Windows 3.11 or greater versions).

12. Use the CentreWare Network Services CD-ROM (CD-ROM 2) to install print drivers on a Windows-based workstation. Details for this are found in the document supplied with your printer entitled Getting Started with Print and Fax Services.

13. On the Configuration Report review the NetBIOS: area and note the Workgroup, Host Name, and Printer Name.

Windows for Workgroups Users

•Open the Control Panel and double-click the Printers icon.

•Select the printer driver you just installed and click Connect.

•Select an available port and click Network.

•Double-click the name of the WorkGroup for the printer.

•Double-click the Host Name of the printer.

•Click once on the Printer Name then click

OK.

Windows 95, Windows 98 and Windows NT 4.X Workstation Users

•Click the Start button and select Settings.

•From the cascade menu select Printers.

•Select a printer with the right mouse button.

•Select the Properties entry in the cascade menu.

•Select the Details tab on the Properties dialog.

•Click the Add Port button and browse to the Workgroup.

•Double-click the name of the WorkGroup for the printer as shown on the Configuration Report.

•Double-click the Host Name of the printer as shown on the Configuration Report.

•Click once on the Printer Name then click

OK.

14. Open an application and print a test page to verify operation.

15. If your print job does not print, refer to the Troubleshooting section of the Network

Installation and Troubleshooting Guide

to solve the problem.

Page 2