New Features And Updates For EPS Products Only
LCDS Tape Client updates
DocuSP 4.2 enables users to select and print single or multiple LCDS reports from the DocuSP Tape Client GUI. If multiple reports are desired, the reports must be specified in ascending order with a position relative to the beginning of the container.
The user can specify a range of reports from a file for printing. The report range applies to the first file in the file range only, and uses the same format as the file range. The maximum length for the report range is set to 120 characters.
The Tape Client GUI is modified to support Reporting. The File Ranges panel is renamed to Tape File Selections. Within this panel, a new radio button for Reports and a text field for Report Ranges are added.
GUI behaviors
♦Selecting All: the Tape Client GUI prints all files on the tape as in DocuSP 4.1.
♦Selecting Range: the Tape Client GUI prints a range of files on the tape as in DocuSP 4.1.
♦Selecting Reports: The Tape Client GUI prints reports from the first file specified in the Files text field. If there is more than one entry in the Range field, the subsequent entries are ignored.
LCDS Accounting page update
DocuSP 4.2 introduces an update to the LCDS accounting page. Prior to 4.2, only the initial JDL/JDE was printed on the LCDS accounting page and saved in the DocuSP accounting log. In 4.2, the Initial JDL/JDE remains the same; however, the Current (or Last) JDL/JDE is also printed on the LCDS accounting page and saved in the DocuSP accounting log.
DocuSP 4.1 to 4.2 Differences Document | 25 |
