THE DOCUMENT COMPANY
XEROX
Xerox Document Centre ColorSeries 50 LP/ST Novell NetWare® Quick Install
Step 2 Customize Printer Connectivity Settings
If you use CentreWare Printer Admin Services:
1.
2.
3.
4.
5.
6. Review the displayed settings and make any changes, if necessary.
7. Click on the NetWare tab and then review and edit the Print Server Name, Print Server
Password, Poll Interval and SAP Interval
settings, as needed.
a)For a Bindery installation, you must also enter a name in the File Server 1 field. Enter information in other fields as desired.
b)For a NDS installation, you must enter information in the Tree Name and Context fields.
8. If you are using IP, continue with Step 9. If you are not using IP, skip to Step 11.
9.
10. Review and edit any fields, if necessary. If you enable DHCP, be sure to save the new Configuration Report that will print approximately 5 minutes after you power off and power on the printer, since the IP Address may have changed. You will need the new address the next time you access the settings.
11. When you have finished entering the Settings data, click Apply, OK and then Exit.
12. Power off and power on the printer. Allow at least 30 seconds between powering off and powering on the printer. A Configuration Report will print in approximately 5 minutes. The information on the Configuration Report can be very helpful in completing the network installation and troubleshooting problems with your printer.
13. Continue with Step 3 Print a Test Page.
Step 2 Customize Printer Connectivity Settings
If you use CentreWare Internet Services:
1. At your workstation, open the Internet Explorer or NetScape navigator browser.
2. In the browser, enter the IP Address for the printer and press the Enter key. The Internet Services Home Page is displayed.
3. Click on the Properties button.
4. Click Connectivity, Protocols, and NetWare
to view NetWare information.
5. Review and edit the NetWare settings.
6. Click Apply New Settings if any changes were made. Provide a User Name and Password when prompted. The default User Name is Admin with a capital “A” and the default password is 11111.
7. Power off and power on the printer. Allow a full 30 seconds between powering off and powering on the printer.
8. Continue with Step 3 Print a Test Page.
Step 3 Print a Test Page
1. Install the network printer driver for your work- station environment, and print a test page. Details on installing printer drivers, printing a test page, and other printing options are pro- vided in the Xerox Document Centre ColorSeries 50 LP/ST Printer User Guide.
2. Details on installing the printer with NetWare is in the Xerox Document Centre ColorSeries 50 LP/ST Printer Installation Guide.
For assistance, contact your local Xerox Customer Support Center: USA: | ©1999 Xerox Corporation |
Bustled Controller, Part Numbers 97N00893 and 97N00894 are for use with Xerox Corp. Digital Color Product Model | 701P30987 |
|
