Selecting the Crown Port
magicolor 6100 DeskLaser User's Guide2-2
Introduction
The magicolor 6100 DeskLaser printer driver is for use with Windows 95/98/2000 and
NT 4.0 operating systems. This chapter describes how to configure the printer driv er
and the Crown Print Monitor. We’ve also included information about using the
MINOLTA-QMS Printer Status Monitor.
Selecting the Crown Port
If you installed the Crown Print Monitor, follow the instructions in th is section to assign
the new Crown port that was created.
1 From the Start menu, choose Settings.
2 Choose Printers.
3 In the Printers window click the right
mouse button on the magicolor 6100
DeskLaser printer to display the
printer’s menu.
4 Choose Properties.
5 Choose the Details tab (Windows 95/
98) or Ports tab (Windows 2000/NT
4.0).
6 From the Print To The Following Port
list, choose the Crown port that was
added during the Crown Print Moni-
tor installation.
7 Choose OK to close the Printer
Properties window.
8 Close the Printers window.