Xerox 6100 - page 30

Configuring the Printer
Driver
magicolor 6100 DeskLaser User's Guide2-4
»Note:
You should configure your printer driver settings via the printer driver properties
method for your typical print jobs and use your application’s printer setup metho d for
print jobs that require special, less frequently needed printer settings.
The tabs and a summary of the options found on each are as follows:
General—Allows you attach comments, use a separator page, and print a
test page. See your Windows documentation.
Details—Allows you to set interface connection details. See your Windows
documentation.
Sharing—Allows you to set up the printer so others on the network can u se it.
See your Windows documentation.
Color Management (Windows 98 only)—Allows you to select the color pro-
file associated with your printer or allow the operating system to make the
selection for you.
32-bit SuperDriver Setup—This tab leads to the following set of tabs that are
also available from your application’s printer setup properties. See “32-bit
SuperDriver Setup” on page 2-7.
Paper—Allows you to provide information about the document type and
location of the media you want to print on. See “Configuring Paper
Options” on page 2-8.
Page Layout—Allows you to specify N-up (Number-up) settings, scaling
and watermarks used for your print jobs. See “Configuring Page Layout
Options” on page 2-14
Image—Allows you to provide settings for color format, image brightness
and contrast, color balance, and color matching. See “Configuring Image
Options” on page 2-21.
Device Option—Allows you to specify which printer options are installed
on your printer. See “Configuring Device Options” on page 2-25.
About—Displays the magicolor 6100 DeskLaser printer driver release
version and date. See “Information on the About Tab” on page 2-26.