Xerox 6100 Paper Source, Different Paper for 1st Page

32-bit SuperDriver Setup
Printer Driver Configuration 2-11
Paper Source
Different Paper for 1st Page
Purpose Sets the input source (cassette) from which print media is pulled into the
printer
Choices Auto—The printer will use the first cassette it can find that contains media
large enough to satisfy the print job requirements.
Upper Tray—The cassette in the standard (upper) position.
Optional (1 or 2)—The cassette(s) in the lower position (available only on
printers with one or two lower feeder units installed).
Default None
Notes When the printer is first turned on, the upper tray is selected. After that, the
printer uses the last cassette selected.
See “Different Paper for 1st Page” in this section.
Purpose Allows you to select the paper source that will be used for the firs t p age of the
document.
Choices Enabled (selected)—The first page of the document will use the paper
source identified in the 1st Page list.
Disabled—All pages of the document use the same paper source.
Default Disabled
Additional
Choices When enabled is selected, the 1st Page list is activated. See “1st Page” in this
section.