Installation Preparation Document (for physical installation of the product only)
Xerox DocuTech 6100/6115/6135
Physical requirements
•The DocuSP Controller Monitor and Keyboard are designed to be positioned on top of the DocuTech 61XX printer. The controller platform is designed to either be mounted in a stand to the left of the printer, or to be positioned on the floor to the left of the printer.
•Warning: Due to safety requirements, under no circumstances should the user interface be visually separated from the printer module. All system installations must enable mobility of the user interface to within 30” (760 mm) of the printer for service and customer maintenance actions.
Environmental Requirements
| Min. | Max. |
Temperature | 50 o F | 85 o F * |
Humidity | 30% RH | 60% RH |
|
|
|
Heat Emission - with | 22,165 | 14,185 BTU/Hr |
Binder On | BTU/Hr | (With Vent Kits) |
Heat Emission - with | 21,265 | 13,609 BTU/Hr |
Binder Off | BTU/Hr | (With Vent Kits) |
Power Consumption | 1,330 Watts | 5,890 Watts |
Printer/Finisher w/ Binder | (Standby) | (Running) |
On |
|
|
Power Consumption | 1,000 Watts | 5,630 Watts |
•The Ethernet connection to the DocuSP controller must be compatible with the Institute of Electrical and Electronics Engineers (IEEE) 802.3 standard. (The physical form of this connecter is RJ45 and must be correctly wired.)
•The DocuSP controller supports
•The DocuSP controller does not provide Novell Server network services. To use the SPX/IPX protocol, a Novell server installed on the network is required.
•A Xerox Token Ring solution is available for the 61XX family. When Token Ring is installed, it becomes a Token Ring only connectivity solution. The NetWare gateway and AppleTalk gateway will not function, and the built in Ethernet bge0 twisted pair interfaces are disabled. (Gigabit Ethernet is supported with a Sun controller card – some customers have asked for this option.)
Telephone Requirements
A voice telephone line is required where the DocuTech 6100, 6115, 6135, is installed.
Voice line will be used when the operator, administrator, or Xerox Service Personnel is asked to read the screen information from the DocuSP controller dialogs to Xerox Customer Support or Technical Support Center Personnel.
Position / Performance at Maturity
Printer/Finisher w/Binder | (Standby) | (Running) |
Off |
|
|
*The system will inhibit software problems and shut down above 90 o
F
Operating Supplies |
|
| |
|
| Reorder No. | Impressions / Unit |
| Dry Ink | 6R206 | 220K/Carton at 6% |
|
|
| area coverage |
| Developer | 5R161 | 750K / Carton |
8
7
6
Average 5
Monthly
Service 4
Calls 3
2
1
Optimum Range
300K | 500K | 1M | 1.5M | 2M |
Average Monthly Copy Volume
Fuser Agent | 8R2955 | 250K / Bottle |
Stitcher Wire | 8R1174 | 32K / Roll |
|
|
|
Binder Tape - Black | 8R2928 | 425 Binds / Reel |
|
|
|
Binder Tape – White | 8R3601 | 425 Binds / Reel |
|
|
|
Binder Tape – Gray | 8R3602 | 425 Binds / Reel |
Binder Tape – Blue | 8R3603 | 425 Binds / Reel |
|
|
|
Binder Tape – Brown | 8R3604 | 425 Binds / Reel |
Note:
This product is targeted for the 300K to 2M copies per month market segment. Usage above this range may result in a higher service frequency
Binder Tape – Red 8R3824 425 Binds / Reel
The Xerox Supplies Marketing Center, 1.800.822.2200, is available for ordering Xerox supplies, including paper and other thruput material.
Network Requirements
•The Ethernet interface on the DocuSP controller is a 10/100- MB/sec twisted pair standard (10BaseT).
Please ensure electrical, space, and supplies are available prior to equipment delivery.
701P43857
June 2005