Xerox 980 manual Hints and Tips, Path from Main Menu, Present, Required Change, Comments

Hints and Tips	Xerox 490/980 Color Continuous Feed Printing System
Path from Main Menu	Present	Required Change	Comments
Printer Manager/	6. Place the new line	6. Insert the new line	Same change for
Consumables/Kit A	filter (g), push it in until	filter (g) in the machine	all Kit A colors.
(Black) Replace	it stops, and then lower	and lower the filter
	the filter retainer (f).	retainer (f).
Printer Manager/	7. Along the guide (h),	7. Insert the bag filter (e)	Same change for
Consumables/Kit A	push in the toner filter	along the guide (h).	all Kit A colors
(Black) Replace	(e) until it stops.
Printer Manager/	8. Place the guide (h) in	8. Replace the guide (h)	Same change for
Consumables/Kit A	the arrow direction.	in the arrow direction.	all Kit A colors.
(Black) Replace	Then holding the	Push the handle (c) in to
	handle (c), push it in to	secure the bag filter.
	secure the toner filter.	Close the bag filter door.
	Close the toner filter
	box door.
Printer Manager/	1. Open the printer front	1. Open the printer front	Same change for
Consumables/Kit B	cover (a) where the Kit B	door matching the Kit B	all Kit B colors.
(Black) Replace	you want to replace is	color.
	installed.
Printer Manager/	3. Pulls to the front with	3. Pull the knob (d)	Same change for
Consumables/Kit B	the knob (d) of a	forward to remove from	all Kit B colors.
(Black) Replace	cleaner brush, and	the brush (e).
	removes from the brush	Delete the bullet.
	(e).
Printer Manager/	4. Attach the collector	Re-write Step 4 as	Same changes or
Consumables/Kit B	bag (that is included in	follows:	all Kit B colors.
(Black) Replace	Kit B) (f) to the opening	4. Attach the collector
	of the cleaner brush.	bag (f) to the opening of
	Holding the collector	the cleaner brush.
	bar that is included in	Holding the collector bar
	the bag. Then push it in	inside the bag, push the
	to the extent the	bar firmly into the brush.
	Cleaner brush will be	(refer to figure on the
	pulled out with the bar.	next screen)
Printer Manager/		Delete the “5.” and start	Same change for
Consumables/Kit B		with the *	all Kit B colors.
Printer Manager/	5. Pull back the collector	Change number to 5 and	Same change for
Consumables/Kit B	bar along with the	re-write as follows:	all Kit B colors.
(Black) Replace	cleaner brush (b) in	5. Slowly pull out the
	small steps. Contain the	collector bar along with
	Cleaner brush in the	the cleaner brush (b).
	bag (f) and then detach	Contain the Cleaner
	the bag from the brush	Brush in the bag (f) and
	opening.	remove the bag from the
	*After removing the	brush opening.
	cleaner brush, wipe out	Re-write bullet as follows:
	dust, paper dust, and	*Clean dust and toner
	spilt toner with non-	with non-woven cloth.
	woven cloth.

1-14 Hints and Tips User Guide