B2500
B2500 MFP User’s Guide
26
4 - WLAN network
Setting up the PC
For this section, refer to the instructions supplied
by the manufacturer of your server to help you to
find and join the "house" network.
1Plug WLAN USB key into a USB port on t he PC.
2Use the server software to detect the network.
3Join the network "house" once this has been
detected.
4Now set up the WLAN network connection of
your PC.
To do this, you must configure the element
Protocol Internet (TCP/IP) for the WLAN
connection that has been created. If this
element is set up in such a way as to obtain an
IP address automatically, you must change it
to manual mode to set up the TCP/IP address
("169.254.0.1" in our example), the subnet
mask ("255.255.0.0" in our example) and the
default gateway ("0.0.0.0" in our example).
5Enter OK.