Installation

 

! Before operating your new appliance please read

GB

this instruction booklet carefully. It contains

 

important information concerning the safe operation,

 

 

installation and maintenance of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of

 

the appliance.

Positioning

!Keep all packaging materials out of the reach of children. It may present a choking or suffocation hazard (see Precautions and tips).

!The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals.

Built-in appliance

Use the appropriate cabinet to ensure that the appliance functions properly.

The supporting surface must be heat-resistant up to a temperature of approximately 100°C.

If the appliance is to be installed above an oven, the oven must have a forced ventilation cooling system.

Avoid installing the hob above a dishwasher: if this cannot be avoided, place a waterproof separation device between the two appliances.

Depending on the hob you want to install, the cabinet must have the following dimensions (see figure):

 

 

 

 

 

590

 

 

 

 

 

48

 

 

 

 

 

 

 

 

 

 

 

 

520

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

-

 

 

 

560

 

490

+/

 

 

 

 

+/-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

690

 

 

 

 

 

785

 

 

 

 

 

 

 

 

48

 

 

 

 

48

 

 

 

 

 

 

520

 

 

 

510

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

1

 

 

 

-

750

 

-

560

 

490

+/

 

+/-1

490+/

+/-

 

 

 

 

 

 

1

 

 

 

 

 

 

 

Ventilation

To allow adequate ventilation and to avoid overheating of the surrounding surfaces the hob should be positioned as follows:

At a minimum of 40 mm from the back panel and 600 mm from any other vertical surfaces.

So that a minimum distance of 20 mm is maintained between the installation cavity and the cabinet underneath.

min. 20 mm

mm5 COMPARTMENT

min. 40 mm

min. 20 mm mm5

FAN-ASSISTED

OVEN

min. 40 mm

Fixing

The appliance must be installed on a perfectly level supporting surface.

Any deformities caused by improper fixing could change the features and the operation of the hob.

REAR SPRING ASSEMBLY

FRONT OF HOB

KITCHEN

30

40

WORKTOP

 

 

 

 

 

 

HOB FROM BELOW

2

Page 2
Image 2
Xerox ET 7424, ET 6124 X manual Installation, Positioning, Built-in appliance, Ventilation