- 20 -
The window indicates that the device has
not been recognized by Windows. Click on
NEXT.
Click on FINISH to complete the addition of
the port.
Click on CANCEL.
The window indicates that the terminal has
not been recognized by Windows. Select
CUSTOM, then click on SETTINGS...
Select LPR and enter AUTO in the QUEUE
NAME field, then click on OK.
Note: Do not enable SNMP.
RAW protocol LPR protocol
LU 252813189 Kit Laser Multifonction LAN XEROX GB.book Page 20 Lundi, 27. novembre 2006 4:47 16