A
Examples of ventilation holes for comburant air.

Installation

 

! Before operating your new appliance please read this

GB

instruction booklet carefully. It contains important information

 

for safe use, installation and care of the appliance.

 

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

Positioning

!Keep packaging material out of the reach of children. It can become a choking or suffocation hazard (see Precautions and tips).

!The appliance must be installed by a qualified professional according to the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.

!This unit may be installed and used only in permanently ventilated rooms in accordance with British Standard Codes Of Practice: B.S. 6172 / B.S. 5440, Par. 2 and B.S. 6891 Current Editions. The following requirements must be observed:

• The room must be equipped with an air extraction system

that expels any combustion fumes. This may consist of a

hood or an electric fan that automatically starts each time

also be equipped with vents to allow gas to escape in the event of a leak. As a result LPG cylinders, whether partially or completely full, must not be installed or stored in rooms or storage areas that are below ground level (cellars, etc.). It is advisable to keep only the cylinder being used in the room, positioned so that it is not subject to heat produced by external sources (ovens, fireplaces, stoves, etc. ) which could raise the temperature of the cylinder above 50°C.

Fitting the appliance

Gas and mixed hobs are manufactured with type X degree protection against overheating. The following precautions must be taken when installing the hob:

•Kitchen cabinets adjacent to the appliance and taller than the top of the hob must be at least 600 mm from the edge of the hob.

•Hoods must be installed according to their relative installation instruction manuals and at a minimum distance of 650 mm from the hob.

•Place the wall cabinets adjacent to the hood at a minimum height of 420 mm from the hob (see figure).

the appliance is switched on.

 

600mm min.

700mmmin.

600mmmin.

If the hob is installed beneath a wall cabinet, the latter must be situated at a minimum of 700 mm above the hob (see figure).

In a chimney stack or branched flue.

Directly to

(exclusively for cooking appliances)

the Outside

•The room must also allow proper air circulation, as air is needed for combustion to occur normally. The flow of air

must not be less than 2 m3/h per kW of installed power. The air circulation system may

take air directly from the outside

by means of a pipe with an inner

cross section of at least 100 cm2; the opening must not be vulnerable to any type of blockages.

•The installation cavity should have the dimensions indicated in the figure.

Fastening hooks are provided, allowing you to fasten the hob to tops that are between 20 and 40 mm thick. To ensure the hob is securely fastened to the top, we recommend you use all the hooks provided.

 

 

 

 

555 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mm

 

 

 

 

 

 

 

 

 

 

55

 

 

 

 

 

 

m

m

 

 

 

 

 

 

 

 

 

 

 

475

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjacent

Room to be

Room

Vented

Enlarging the ventilation slot

between window and floor.

The system can also provide the air needed for combustion indirectly, i.e. from adjacent rooms fitted with air circulation tubes as described above. However, these rooms must not be communal rooms, bedrooms or rooms that may present a fire hazard.

Hook fastening diagram

Hooking position

Hooking position

for top H=20 mm

for top H=30 mm

•Liquid petroleum gas sinks to the floor as it is heavier than air. Therefore, rooms containing LPG cylinders must

2

Page 1 Page 3
Page 2
Image 2
Xerox GF750TX, GF761RFX specifications Installation, Positioning, Fitting the appliance, Hook fastening diagram
Page 1 Page 3

GF761RFX, GF750TX specifications

The Xerox GF750TX and GF761RFX are advanced multifunction printers that showcase Xerox's commitment to quality, performance, and cutting-edge technology. Specifically designed for high-volume environments, these models integrate printing, scanning, copying, and faxing capabilities into a single efficient device.

The GF750TX is recognized for its robust performance. Equipped with a powerful processor, it boasts impressive print speeds of up to 75 pages per minute, making it ideal for busy offices with demanding workloads. Its first-page-out time is remarkably quick, allowing users to minimize waiting and maximize productivity. Users can print in both black and white and color, with exceptional resolution options that ensure sharp text and vibrant graphics.

Similarly, the GF761RFX also excels in speed and quality, with a print speed of up to 75 pages per minute. One of its standout features is its advanced scanning technology, which enables duplex scanning at incredible speeds. This feature is particularly beneficial for offices looking to digitize documents quickly. Both models support a wide range of media types and sizes, offering flexibility for various printing needs, from standard letter documents to oversized marketing materials.

Security is another critical focus for both the GF750TX and GF761RFX. With built-in security features including user authentication, data encryption, and secure print options, these printers protect sensitive information from unauthorized access. Administrators can manage user permissions and monitor usage through an intuitive web interface, enhancing overall security and control over the printing environment.

In terms of user experience, both models are equipped with intuitive touchscreen interfaces that simplify navigation and operation. Users can easily access commonly used functions, configure print settings, and perform maintenance tasks without extensive training.

Connectivity options are extensive, with support for USB, Ethernet, and wireless connections. This versatility allows users to print from a variety of devices, including smartphones and tablets, enhancing ease of use in a mobile work environment.

Overall, the Xerox GF750TX and GF761RFX represent the forefront of printing technology. High-speed performance, exceptional print quality, robust security features, and user-friendly interfaces culminate in two multifunction devices that can meet the needs of modern workspaces while driving efficiency and productivity.
Top Page Image Contents