Electrical Connection

Power supply voltage and frequency: 220-240V a.c.

GB 50/60Hz.

!The supply cable must be positioned so that it never reaches at any point a temperature 50°C higher than the room temperature. The cable must be routed away from the rear vents. Should you require it, you may use a longer cable, however, you must ensure that the cable supplied with the appliance is replaced by one of the same specifications in accordance with current standards and legislation.

Your appliance is supplied with a 13 amp fused plug that can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

!THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a cable extension or to re-route the mains cable through partitions, units etc., please ensure that either:

• the plug is replaced by a fused 13 amp re- wireable plug bearing the BSI mark of approval.

or:

•the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Please note: for appliances with a rating greater

than 13 amp (eg: electric hob, double ovens and freestanding electric cookers etc.) the mains cable must be wired into a cooker output point with a

rating of 45 amp. In this case the cable is not supplied.

Disposing of the plug

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket. Instructions for connecting cable to an alternative plug:

!The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow	- Earth
Blue	- Neutral
Brown	- Live

If the colours of the wires in the mains lead do not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

Connect Green & Yellow wire to terminal marked “E”

or or coloured Green or Green & Yellow.

Connect Brown wire to terminal marked “L” or coloured Red.

Connect Blue wire to terminal marked “N” or coloured Black.

If a 13 amp plug (BS 1363) is used it must be fitted with a 13 amp fuse. A 15 amp plug must be protected by a 15 amp fuse, either in the plug or adaptor or at the distribution board. If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

How to connect an alternative plug

The wires in this mains lead are coloured in accordance with the following code:

BLUE			“NEUTRAL” (“N”)
BROWN			“LIVE” (“L”)
GREEN AND YELLOW			“EARTH” (“E”)

	GREEN &
	YELLOW
	BROWN	13 amp fuse
	BROWN
	BLUE	CROSS-BAR
		CORD GRIP

Disposing of the appliance

When disposing of the appliance please remove the plug by cutting the mains cable as close as possible to the plug body and dispose of it as described above.

GF761RFX, GF750TX specifications

The Xerox GF750TX and GF761RFX are advanced multifunction printers that showcase Xerox's commitment to quality, performance, and cutting-edge technology. Specifically designed for high-volume environments, these models integrate printing, scanning, copying, and faxing capabilities into a single efficient device.

The GF750TX is recognized for its robust performance. Equipped with a powerful processor, it boasts impressive print speeds of up to 75 pages per minute, making it ideal for busy offices with demanding workloads. Its first-page-out time is remarkably quick, allowing users to minimize waiting and maximize productivity. Users can print in both black and white and color, with exceptional resolution options that ensure sharp text and vibrant graphics.

Similarly, the GF761RFX also excels in speed and quality, with a print speed of up to 75 pages per minute. One of its standout features is its advanced scanning technology, which enables duplex scanning at incredible speeds. This feature is particularly beneficial for offices looking to digitize documents quickly. Both models support a wide range of media types and sizes, offering flexibility for various printing needs, from standard letter documents to oversized marketing materials.

Security is another critical focus for both the GF750TX and GF761RFX. With built-in security features including user authentication, data encryption, and secure print options, these printers protect sensitive information from unauthorized access. Administrators can manage user permissions and monitor usage through an intuitive web interface, enhancing overall security and control over the printing environment.

In terms of user experience, both models are equipped with intuitive touchscreen interfaces that simplify navigation and operation. Users can easily access commonly used functions, configure print settings, and perform maintenance tasks without extensive training.

Connectivity options are extensive, with support for USB, Ethernet, and wireless connections. This versatility allows users to print from a variety of devices, including smartphones and tablets, enhancing ease of use in a mobile work environment.

Overall, the Xerox GF750TX and GF761RFX represent the forefront of printing technology. High-speed performance, exceptional print quality, robust security features, and user-friendly interfaces culminate in two multifunction devices that can meet the needs of modern workspaces while driving efficiency and productivity.

Xerox GF750TX, GF761RFX specifications Electrical Connection

Models: GF761RFX GF750TX