Installation

 

! Before placing your new appliance into operation

GB

please read these operating instructions carefully. They

 

contain important information for safe use, for installation

 

 

and for care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-free room.

2. Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3. Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

2

Page 1 Page 3
Page 2
Image 2
Xerox HS1621 manual Installation, Positioning and connection
Page 1 Page 3

HS1621 specifications

The Xerox HS1621 is an advanced high-speed digital printing solution designed to meet the dynamic demands of modern printing environments. This printer stands out for its robust performance, exceptional print quality, and a host of innovative features that make it a preferred choice for businesses looking to enhance their printing capabilities.

One of the key features of the HS1621 is its impressive print speed, which can reach up to 162 pages per minute. This rapid output is complemented by a high monthly duty cycle, enabling organizations to handle large volumes of printing without compromising quality. The HS1621 supports a variety of media types and sizes, making it versatile enough to accommodate different printing jobs, whether it be brochures, reports, or marketing materials.

The HS1621 utilizes advanced LED technology, which not only contributes to its high-speed printing but also ensures crisp and clear image quality. The resolution can reach up to 1200 x 1200 dpi, producing vibrant colors and sharp text that meet the expectations of even the most discerning clients. This makes the HS1621 ideal for applications requiring high fidelity, such as high-end marketing collaterals.

Another noteworthy characteristic of the HS1621 is its integrated workflow solutions. The printer comes equipped with features that facilitate seamless connectivity and efficient operation. It supports various file formats and can be easily integrated into existing networks. With built-in software utilities, users can manage print jobs more effectively, ensuring that tasks are completed swiftly and securely.

Security is also a priority for the HS1621, which offers robust encryption and user authentication features to protect sensitive data. This is particularly important for organizations handling confidential documents, as it helps mitigate the risk of unauthorized access or data breaches.

In terms of sustainability, the HS1621 is designed with energy-efficient technologies that minimize its environmental impact. It features an eco-mode that reduces energy consumption during idle times and incorporates duplex printing capabilities to reduce paper waste.

Overall, the Xerox HS1621 represents a comprehensive solution for high-volume printing needs, combining speed, quality, efficiency, and security in a single, powerful device. For businesses looking to invest in a reliable and adaptable printing solution, the HS1621 stands out as an exemplary choice.
Top Page Image Contents