Scan to FTP/SMB Setup
Files can be scanned on the M123/M128 device and routed on to a server or a client using FTP or SMB protocol. Directory structures (repositories) need to be created on the server to hold the scanned documents. It is assumed that an FTP server/client or an SMB server/client exists and is configured on the network.
Prerequisite
Complete the Network Installation. Refer to Æ General Network Setup
Complete DNS/WINS set up if Host names are provided for the mail servers, rather than IP addresses. Refer to Æ Advanced Network Setup
Scan to FTP/SMB Setup
Field Name | Description | Location | Scan | Scan To | Value |
|
|
| To | SMB |
|
|
|
| FTP |
|
|
Enable | Port by which TCP/IP client | WUI: | R | R |
|
“TCP/IP” Port” | communicates with the | Properties Æ Port Settings |
|
|
|
| TCP/IP server | LUI: |
|
|
|
|
|
|
|
| |
|
| System Settings Æ System Settings Æ |
|
|
|
|
| Network Settings Æ Port Settings |
|
|
|
Enable “FTP | Port by which FTP client | WUI: | R | NR |
|
Client” Port | communicates to the FTP | Properties Æ Port Settings |
|
|
|
| server | LUI: |
|
|
|
|
|
|
|
| |
|
| System Settings Æ System Settings Æ |
|
|
|
|
| Network Settings Æ Port Settings |
|
|
|
Enable “SMB | Port by which SMB client | WUI: | NR | R |
|
Port” | communicates to the SMB | Properties Æ Port Settings |
|
|
|
| server | LUI: |
|
|
|
|
|
|
|
|
Page 21 of 28 | 701P42081 |