Network Scanning:
•The user selects <Network Scanning>
•A login/password popup will be displayed to authenticate users with the Kerberos server.
•User enters the login and password.
•The login and password is passed on to the Kerberos server and if a match is found the user is successfully authenticated.
•Through the templates/repositories, the users will enter a valid login/password for FTP/SMB servers. This may or may not be the user login/password; rather it is a login/password that is accepted by the FTP/SMB server.
•Public templates are accessible to any user. Private templates require a password that may or may not be different from the Kerberos password.
Prerequisite
Complete the Network Installation. Refer to Æ General Network Setup
Complete DNS/WINS set up if Host names are provided for the mail servers, rather than IP addresses. Refer to Æ Advanced Network Setup
Remote Authentication Setup |
|
|
| |
|
|
|
|
|
Field Name | Description | Location | Value | |
Remote Setup login | Enable Remote Authentication | LUI: |
|
|
|
| System Settings Æ Login setup/Auditron |
|
|
|
| Administration Æ Remote Login Setup | Default: |
|
|
|
| ON: |
|
|
|
| Guest ON: |
|
Remote Server IP | The IP address or the host name |
| _____._____._____._____ |
|
Address or Server | of the Kerberos server. |
| Ex of the IP address: |
|
name. | Note: If server host name is used | LUI: | 192.168.1.2 |
|
|
|
| ||
| instead of the IP address, refer to | System Settings Æ System Settings Æ |
|
|
| Advanced Network Setup for | Network Settings Æ Remote | Ex of the host name: |
|
| DNS / WINS settings. | Authentication | Ex:<name>..<company>.com |
|
Page 9 of 28 |
|
| 701P42081 | |
