PROCEDURE D
UPGRADE VIA NOVELL NETWARE QUEUE
Warning: Once the upgrade process has begun DO NOT Power off your Printer!
1.Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you
Upgrade
2.Submit the upgrade file to the printer queue using your normal Novell NetWare print procedure. Send the file directly, do not use a print driver or an application.
3.The upgrade should take about 10 minutes to perform.
4.To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade.
IF YOU HAVE PROBLEMS:
If the printer never goes to “Downloading” check the status of the job in the queue. If the job is in the queue and Active, but not being sent to the printer, power the printer “off “and then “on”. See if the job is then sent to the printer.
In addition, consult the section labeled General Troubleshooting.
Warning: If the download was not successful, upgrade via the parallel port!
Version 1.8 | 2/4/99 | 11 |
