PROCEDURE E
MACINTOSH – XEROX PRINTER UTILITY
Warning: Once the upgrade process has begun DO NOT Power off your Printer!
1.Print a Configuration sheet. Keep this page for future reference. For directions on doing this, reference the section labeled Before you Upgrade.
2.Launch the Xerox Printer Utility
3.Select the N17 printer to upgrade in PostScript Printers list.
4.Select Send File.
5.Locate the upgrade file.
6.Select Open to send the upgrade file to the printer.
7.The Xerox Printer Utility will send the upgrade file to the printer. The upgrade should take about 10 minutes.
8.To confirm upgrade is successful, refer to the section labeled Determining a Successful Upgrade. For problems, consult the section labeled General Troubleshooting.
Warning: If the download was not successful, upgrade via the parallel port!
Version 1.8 | 2/4/99 | 12 |