VIZIO VW37L HDTV30A User Manual
Version 4/2/2008 30
www.VIZIO.com
connector, Composite (Yellow, Red and White) connectors, Component (Red, Green, Blue plus Red
and White) connectors, HDMI connectors or Separate-Video (S-Video) plus Red and W hite
connectors (if applicable). Make the physical connection or hook up.
b. If you have an HD service you must use the HDMI (best) or Component connection.
Note: Composite (AV) and S-Video (AV) Cables can only be used for SD (480i) pictures .
c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see
a picture on your TV set. If there is not picture, make sure you ha ve selected the correct input on the TV
set.
d. If the selected in put is RF, you should be aware that the TV set needs to be on either
channel 3 or channel 4 matching the channel which has been selected on the back of the
VCR, C able Box, External TV Tuner or Satellite Receiver; please refer to Owner or
User’s Manual of such equipment for details.
Note: The TV set will be displaying any television st ation or program selected by the Cable Box, VCR,
External Tuner or Satellite Receiver. The TV set will not be able to change programs or c hannels; this is
controlled by the equipment sending the signal. If the service b eing used is the one wh ich setup
includes a box with two different outputs for two different (distant) roo ms, then scanning
channels would help you to find the signal. Be aware th at the channel to be selected varies from
provider to provider; meaning that, you may hav e to ca ll your provider company so they could
provide you the specific channel when using high definition made TV sets. Som e examples of
these channels are: 105, 106, 115 and 116.
6. Fine Tuning your TV set for Home U se.
After completing Procedure 4 or
Procedure 5; please follow the steps
below to optimize your TV set display:
a. Press the MENU button to bring up the
Menu display. Use the or button
to scroll to the Color Temperature option.
b. Press the button to select it.
c. Press either or button to change setting
to Normal, and then press the LAST key again to
go back to previous screen.