Xerox VW37L Prepari ng Your LCD HDT V for W all Moun ting, To remo ve the s tand ba se To remo ve the s tand ba seTo remo ve the s tand ba se, To remo ve the s tand ba se ,

VIZIO VW37L HDTV30A User Manual
Version 4/2/2008 6
www.VIZIO.com
Prepari ng Your LCD HDT V for W all Moun ting
Prepari ng Your LCD HDT V for W all Moun tingPrepari ng Your LCD HDT V for W all Moun ting
Prepari ng Your LCD HDT V for W all Moun ting
The VIZIO VW37L HDTV30A can either be kept on the stand base or mounted on the wall for viewing. If
you choose to mount the VW37L HDTV30A on the wall, please follow the ins tructions below for removing
the stand base.
To remo ve the s tand ba se
To remo ve the s tand ba seTo remo ve the s tand ba se
To remo ve the s tand ba se
1. Unplug all of the cables and cords
from your VIZIO VW37L HDTV30A.
2. Place the VW37L HDTV30A face
down on a soft and flat surface
(blanket, foam , cloth, etc) to prevent
any damage to the TV.
3. Remove the eight (8) screws holding
the base to the VW37L HDTV30A.
4. Carefully remove the stand base.
Now, the VW37L HDTV30A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the High Definition TV. Please make sure to
read the instructions of your specific mount to
properly hang the VW37L HDTV30A.
The pitch of the mounting holes is 510mm
horizontally and 200mm vertically.
The screw type required is metric M8, 1.25mm
pitch. The length of the screws will depend on
the thickness plate being attach to the TV set,
our brackets come with different length
screws.
To find the perfect m ount for the VIZIO VW 37L HDTV30A, browse VIZIO’s cert ified mount s election at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).