Getting Started
2.23
2
Speaker, Ringer, Key Sound, and Alarm Sound
1
Press
Menu
until “Sound/Volume” appears on the top line
of the display.
2
Press the scroll button (
W
or
X
) to scroll through the
options. Press
Enter
when you see the desired sound
option.
3
Press the scroll button (
W
or
X
) to display the desired
status or volume for the option you have selected.
You will see the selection on the bottom line of the display.
For the ringer volume, you can select “Off,” “Low,” “Med,”
and “High.” Setting “Off” means that the ringer does not
sound. The machine works normally even if the ringer is
turned off.
4
Press
Enter
to save the selection. The next sound option
appears.
5
If necessary, repeat steps 2 through 4.
6
To return to Standby mode, press
Stop/Clear
.
Speaker Volume
1
Press
Manual Dial
. A dial tone sounds from the speaker.
2
Press the scroll button (
W
or
X
) until you hear the volume
you want. The display shows the current volume level.
3
Press
Manual Dial
to save the change and return to
Standby mode.
N
OTE
: You can adjust the speaker volume only when the
telephone line is connected.