Xerox XR6 Series manual Method 2 Digital DVI Connection XR6-19Dwonly

Installation

Method 2: Digital (DVI) Connection (XR6-19Dw only)

1Turn off the computer and unplug the power cable.

2Connect the signal cable (DVI) to the DVI port on the back of the computer.

3Connect the power cord to the LCD monitor and wall outlet.

4Press the button, located on the bottom side of the main unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.

XR6-19Dw

2 Connect to the DVI port

3Connect to power source

NOTE:

When the DVI and VGA input ports are connected at the same time, press down the AUTO button after 3 seconds to switch between the VGA mode and DVI mode.

14 Xerox© LCD Monitor User’s Manual