Xilinx 3200USBKIT, DT3 Fpga Board With Usb Port, Portable Radio Telescope, Trainers, MODEL RTL-11

Back to Catalog Download Main Page (http://www.elexp.com/a_print.htm)

TRAINERS

FPGA BOARD WITH

USB PORT

•Provides means of learning and prototyping

digital logic, computer systems and FPGA code. This board provides a complete low cost platform using Altera Cyclone II (EP2C8) chip connected to various LEDs, switches and 7- segment displays. One can use web edition of Altera Quartus II to design FPGA code using Verilog HDL, VHDL as well as other design methods

•USB port for transferring FPGA to chip configurations

•8 red LEDs, 8 green LEDs

•2 sets of 4 SPDT switches

•2 debounced, 4 non-debounced switches

•40 pin and 2 DB-9 I/O connectors for interfacing

•24MHz clock; can be multiplied or divided using interal PLL

Part No. 01FPGA4 • Price: $149.00

PORTABLE RADIO TELESCOPE

MODEL RTL-11	Tripod Not
Have hours of fun learning
	Included
about the wonders of Radio
Astronomy. Make a study of
the principles of microwave
radiometry through the use
of RTL-11. This simple instru-
ment is easy to assemble
and operate. It is capable of
detecting solar radio noise
at approximately 11-12 GHz
as determined by satellite re-
ceiver LNB (low noise block
converter).

RTL-11can be used to:

•Demonstrate remote measurement of temperature of various objects

•Demonstrate that the human body or hand generates solar radio noise

•One can use a data logger connected to radio telescope output. The solar noise magnitude can later be plotted vs. time on a

PC

•Other than astronomical applications can be found as various objects absorb, radiate, or reflect microwaves in a manner dif- ferent from that at visible light

RTL-11 includes:		•	F/F male/male adapter
•	Parabolic dish (32 cm)
•	11 GHz LNB	•	Indicator box
•	F-F coaxial cable (2 ft. long)	•	AC/DC wall adapter
•	IF in-line amplifier	•	Instruction manual

*Tripod Not included

Part No. 01RTL-11 • Price: $350.00

PC BOARD DESIGN AND FABRICATION KIT

This kit includes PCB layout software plus material and instruc- tions to make your own printed circuit boards. No dark room processing needed.

Included in Kit:

•Board Creator Software

•Press-N-Peel image transfer film

•Etching solution

•Copper clad boards

•Software manual

•Complete instructions for making PC boards

•More than 100 hobby circuits on CD

Features of the Board Creator Software included in this kit

•Boards up to 10’ x 8’ up to 6 layers with 8 masks each

•Built-in print queue up to 10 masks

•User selectable cursor layout grid up to 1 mil resolution. Items not limited to grid

•Full surface mount device support

•Multiple line widths, from 0.001 to 0.255 inches wide

•Up to 10 different pad shapes and sizes

•Locates and displays errors on-screen

Part No. 32AMSPCBDFKIT • Price: $145.00

80 ELECTRONIX EXPRESS / RSR • 365 Blair Road, Avenel, NJ 07001