Policy Setup
VPN Policy Setup (continued)
Key Management
Key - Key Type:
There are two key types (manual key and auto key) available for the key exchange management.
Manual Key: If manual key is selected, no key negotiation is needed.
Encryption Key - This field specifies a key to encrypt and decrypt IP traffic.
Authentication Key - This field specifies a key use to authentication IP traffic.
Inbound/outbound SPI (Security Parameter Index) is carried on the ESP header. Each tunnel must have a unique inbound and outbound SPI and no two tunnels share the same SPI. Notice that Inbound SPI must match the other router’s outbound SPI.
AutoKey (IKE) - There are two types of operation modes can be used:
Main mode accomplishes a phase one IKE exchange by establishing a secure channel.
Aggressive Mode is another way of accomplishing a phase one exchange. It is faster and simpler than main mode, but does not provide identity protection for the negotiating nodes.
Perfect Forward | If PFS is enable, IKE phase 2 negotiation will generate a new key material |
Secrecy (PFS) | for IP traffic encryption & authentication. |
|
|
Preshared Key | This field is to authenticate the remote IKE peer. |
Key Lifetime | This specifies the lifetime of the IKE generated Key. If the time expires or |
| data is passed over this volume, a new key will be renegotiated. By default, |
| 0 is set for no limit. |
Options
NetBIOS Broadcast | This is used to forward NetBIOS broadcast across the Internet. |
Keep Alive | This is to help maintain the IPSec connection tunnel. It can be re- |
| established immediately if a connection is dropped. |
Anti Replay | The Anti Replay mechanism works by keeping track of the sequence |
| numbers in packets as they arrive. |
Passive Mode | When enabled, your PC establishes the data connection. |
Check ESP Pad | When checked, this will enable ESP (Encapsulating Security Payload) |
| padding. |
Allow Full ECN | Enable will allow full Explicit Congestion Notification (ECN). ECN is a |
| standard proposed by the IETF that will minimize congestion on network |
| and the gateway dropping packets. |
Copy DF Flag | When an IP packet is encapsulated as payload inside another IP packet, |
| some of the outer header fields can be newly written and others are |
| determined by the inner header. Among these fields is the IP DF (Do not |
| fragment) flag. When the inner packet DF flag is clear, the outer packet |
| may copy it or set it. However, when the inner DF flag is set, the outer |
| header MUST copy it. |
Set DF Flag | If the DF (Do not Fragment) flag is set, it means the fragmentation of this |
| packet at the IP level is not permitted. |
37
