XiNCOM XC-DPG503 Configuring other Routers on you LAN, 192.168.2.0, 255.255.255.0, 192.168.1.100

Advanced LAN Configuration

Configuring other Routers on you LAN

All traffic for devices not on the local LAN must be forwarded to the XC-DPG503 so that they can be forwarded to the Internet. This is done by configuring other Routers to use the XC-DPG503 as the Default Route or Default Gateway, as illustrated by the example below:

Configuration settings for the LAN shown with 2 routers and 3 LAN segments, the XC-DPG503 requires 2 entries as follows.

For the XC-DPG503 Gateway’s Routing Table

Entry 1 (Segment 1)
Destination IP Address	192.168.2.0
Network Mask	255.255.255.0
Gateway IP Address	192.168.1.100
Interface	LAN
Metric	2
Entry 2 (Segment 2)
Destination IP Address	192.168.3.0
Network Mask	255.255.255.0 (Standard
	Class C)
Gateway IP Address	192.168.1.100
Interface	LAN
Metric	3
For Router A’s Default Route
Destination IP Address	0.0.0.0
Network Mask	0.0.0.0
Gateway IP Address	192.168.1.1
Metric	2
For Router B’s Default Route
Destination IP Address	0.0.0.0
Network Mask	0.0.0.0
Gateway IP Address	192.168.2.80
Interface	LAN
Metric	3

46