XM Satellite Radio SA10113 manual Skipping channels, Returning to factory defaults

Skipping channels

You can simplify the list of channels that you see when you rotate the dial. To skip over a channel:

1.Use the “menu” button and dial to select “Channel Access.”

2. Choose the “Channel Skip/Add” option.

3. You will see a list of channels. There is a

“+” or a “-“ in front of each channel. To skip a channel, high-

light that channel and press the dial in to

change the “+” to “-.” To add a channel, change the “-“ to a “+.”

4.When you’re done, press the “menu” button twice (or do nothing for 15 seconds) until your MyFi returns to normal operation.

TIP: You can still tune to any channel by entering the channel number or by pressing a preset. Skipping a channel does not remove it from use.

TIP: This should not be used for “parental control.” To completely block access to any XM channel, contact XM Listener Care at 1.800.XM.RADIO (1.800.967.2346).

Returning to factory defaults

You can return your MyFi to its factory-installed format. Be careful: This feature erases all settings, including Stock Ticker, display options, audio options, channel skip/add, Info Extras, and anything stored in “MY XM.”

1.Use the “menu” button and dial to select “Set Factory Defaults.”

2.Select “Yes” to restore your MyFi to the factory settings.

26