Changing brightness of the display

If desired, you can change brightness of the display in three degrees by pressing the DIMMER button.

Normal illumination

DIMMER

Slightly dimDim

CDC-902 only

Adjusting the level of signals output into an amplifier, etc.

You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc. as you prefer by using the OUTPUT LEVEL button.

CDC-902 only

When you listen with headphones

Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL button.

*Note that the use of the OUTPUT LEVEL button will also vary the level of the signal output to an amplifier, etc.

– OUTPUT LEVEL +

OUTPUT LEVEL

 

 

 

or

+

PHONES

 

 

(On the front panel)

* When the DIGITAL AUDIO OUT (OPTICAL) terminal is used for the connection, set the level of output signals to max.

* The level of output signals can be checked on the display.

12