CONNECTIONS
| ● Before making any connections, switch OFF the power to | ● If the placement of this unit causes noise to other |
| the unit and the amplifier or other component. | equipment, such as a tuner, separate them from each other. |
●Connections should be made to the correct input terminals of the amplifier or other component.
English
LINE OUT | DIGITAL |
LINE OUT | |
| AUDIO |
| OUT |
| OPTICAL |
| To AC outlet | To AC outlet |
| ➋ Optical fiber cable |
| ➊ Connection cord | (not included) |
| |
| (included) |
|
➊ Connection cord |
|
(included) | Amplifier |
| |
| OPTICAL |
CD | DIGITAL IN |
●Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component.
●Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier. If the amplifier does not have such terminals, use the “TAPE PB” terminals. For additional details concerning these connections, refer to the operation instructions for the amplifier being used.
●Adjust the level of signals output into an amplifier, etc. by using the OUTPUT LEVEL button.
●Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable.
*Use an optical fiber cable that conforms to EIAJ standards. Other cables might not function correctly.
●Be sure to attach the terminal’s cover when this terminal is not being used, in order to protect the terminal from dust.
●Set the level of signals output into an amplifier to max. by using the OUTPUT LEVEL button.
●This terminal can also be connected to the optical input terminal of a digital audio tape deck (DAT) etc. to record CD onto tape directly.
5