Yamaha 585, CDC-685 owner manual CD Synchronized Recording, To cancel this function

CD SYNCHRONIZED RECORDING

Using a compatible YAMAHA tape deck, you can synchro- nize the tape deck to start recording automatically when a CD starts playing. With this function, you can record a CD on tape more easily and precisely. (Refer to the tape deck’s operation manual to know whether it is compatible or not.)

*This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time.

4If desired, select the track to be recorded first.

1	2	3	DISC SKIP
			or
4	5	6
7	8	9
0	—10

5Press the w button.

OPEN/

SYNCHRO DIMMER CLOSE

TEXT/

TIME PEAK

TAPE CLEAR PROG

1 2 3

4 5 6

DISC SCAN	DISC	SKIP	1
REPEAT		RANDOM

2 5

Both CD play and tape deck recording begin.

* CD play begins a little later than recording.

6 If you want to stop recording temporarily and

7 8 9

0	—10	INDEX
MODE	— OUTPUT LEVEL —

DISC SCAN DISC SKIP

1Select a disc.

DISC SKIP

2Load a tape on the tape deck.

*The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.)

PEAK

3Press the SYNCHRO button.

SYNCHRO

This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.

* In this mode, the time display on this unit blinks.

restart recording from a desired track, follow

steps 3–5 again.

■To cancel this function

Press the a button.

Notes

•To finish or stop recording, press the a button on the tape deck.

•Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc. (Refer to pages 12–13 for the programming procedure.)

•This function can also be used together with the tape-

programming function. (Refer to pages 17–20.)

E-16