TRACK PROGRAMMING FOR RECORDING
■Display information during pro- gramming
3
|
|
|
|
|
|
1 2 3 4 5 | PROG |
|
|
|
|
|
| 1 2 3 4 5 |
| ||
5 20:00
12
1 Shows the number of programmed tracks for each side in turn just after the automatic programming is finished, and then it is replaced by the number of the first programmed track for side A.
2Shows the total time of programmed tracks for each side.
3Shows the programmed track numbers for each side.
Manual Tape Programming
With this function, you can program tracks from one or more discs in any order to be recorded onto tape.
|
| DISC SCAN | DISC SKIP | 2,5 |
|
|
|
| |
|
| REPEAT | RANDOM |
|
SYNCHRO | DIMMER | OPEN/ |
|
|
CLOSE |
|
| ||
| TEXT/ | PEAK |
|
|
| TIME |
|
| |
TAPE | CLEAR | PROG |
| 1 |
8 |
| 4 |
|
|
1 | 2 | 3 |
|
|
4 | 5 | 6 |
|
|
|
| 6 |
|
|
7 | 8 | 9 |
|
|
0 | INDEX |
|
| |
MODE | — OUTPUT LEVEL — |
|
| |
DISC SCAN | DISC | SKIP |
|
|
1Stop the unit.
2If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP buttons in turn.
*This unit will read the contents of a disc by this operation. If there is a disc to which this operation is omitted, tracks on the disc cannot be programmed.
3Follow step 3 on page 17.
4
PROG | 1DISC REP RNDM SAVE BEST | EDIT FILE | |||||
|
| 5DISCS S F PROG CD- | TEXT | 1 | 2 | 3 | 4 |
H | TITLE ARTIST TRACK |
| |||||
| 6 | 7 | 8 | 9 | |||
|
| A- | 1 | 11 12 13 14 | |||
|
| 16 17 18 19 | |||||
|
|
|
|
|
|
|
|
5If necessary, select a desired disc by pressing the DISC SKIP buttons.
6Select a desired track.
1 2 3
4 5 6
7 8 9
0 |
7Repeat steps 5 and 6 to program more tracks for side A of the tape. You can select the same track again.
*If “ERROR” appears in the display, the track number just selected cannot be programmed because there is
no enough time remaining on side A of the tape.
