96

Recalling Recorded Registrations (and

Bulk Data)

The Registrations (and bulk data) recorded to song numbers in the above operation can be easily
loaded back to the AR-80.
To recall Registration data:
1. Insert the proper disk and select the appropriate song number.
Use the SONG SELECT buttons in the M.D.R. section, or use the appropriate Data Control
buttons.
2. Press the PLAY button.
When the data has been completely loaded, the M.D.R. returns to STOP status.
The M.D.R. also makes it possible to use more than the 12 Registration Memory Registrations in a
performance — without having to alter the current panel settings. This would come in handy when
performing several songs in succession that use more than 12 Registrations.
To do this:
1. First record the Registrations you need into several song numbers on the
M.D.R. before the performance.
If possible, you should record the Registrations in the order that you’ll use them, for easy access
during the performance.
2. During the performance, after all 12 Registrations from a certain song
number have been used, select the next song number and press the PLAY
button on the M.D.R. This replaces all 12 Registrations in Registration
Memory with the new ones from the selected song number.
3. By repeating the above steps, you can run through an entire performance
without having to change the panel settings.

Replacing Registrations

The M.D.R. also lets you change the Registrations of an existing song without changing the
performance data. The procedure is the same as that of Recording Registrations mentioned above.
Registration data recorded on the
AR-100 (which features 16
Registrations) can also be used on
the AR-80. However, Registrations
13 - 16 cannot be used with the
Registration Memory buttons. (See
page 84.)