Yamaha CC-70S, CC-70W Timer recording, (To record a tuner program), TUNER, POWER, Receiver, DISPLAY TIMER TAPE, Tape Deck (KX-S90), Tape Deck (KXW-S70)

HOW TO USE THE BUILT-IN TIMER

Receiver

	DISPLAY TIMER TAPE	TUNER
POWER
Tape Deck (KXW-S70)

4 1

Tape Deck (KX-S90)

EMPTY

4 1

Timer recording(To record a tuner program)

1 Load a blank tape into the cassette compartment. (For KXW-S70, load a tape into the DECK B cassette compartment.)

2 Tune to the station of which program you want to record. 3 Follow step 2 of the “Timer play” on pages 40 and 41.

*However, in step 2-➁,press the TAPE input selector button twice so that “REC” flashes on the display. While “REC” is flashing, press the TUNER input selector button.

4 If desired, change the setting of the reverse mode switch and the Dolby NR switch.

5 If you will not use this unit untill the timer recording begins, turn the power off by pressing the POWER switch or the TIMER button.

To confirm the timer time setting

Press the DISPLAY button.

To cancel the setting of timer recording

Press the DISPLAY button once or more so that “REC” flashes on the display. While “REC” is flashing, press the TAPE input selector button.

*Unless the AC supply lead is unplugged or there is a power failure for more than 30 minutes, the time set on the timer will be retained until it is reset.

Note

When the timer recording is finished, the timer setting is automatically canceled to avoid repeating timer recording of the same setting.

42