Yamaha CC-70S, CC-70W Sleep timer operation, Using the timer and the sleep timer at the same time, POWER, POWER, SLEEP, DISPLAY, Receiver, AUTO MEMO, OFF SLEEP

Play the desired sound source.

HOW TO USE THE BUILT-IN TIMER

POWER

Receiver

DISPLAY AUTO MEMO

		TUNER DIRECT
	1	2	3	4	5
	1	2	3	4	5
	6	7	8
	6	7	8	9	0
	A	B	C	D	E
	TIME	PROG	TAPE	EDIT	+I0
		SEARCH		STOP	PLAY/PAUSE
		SKIP
	DISC SKIP	RANDOM	REPEAT
				CD
	PRESET		A/B/C/D/E
	DOWN	UP		TUNER
	PLAY	STOP	PLAY
				TAPE
		REC/PAUSE		DECK	PHONO/AUX
				A/B
POWER	POWER	SLEEP	DISPLAY	VOLUME
				-	+

SLEEP

Sleep timer operationThis unit can be turned off automatically.

1

2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “120”.

3 Press the SLEEP button repeatedly until the desired sleep time appears in the display. The display will change as described below. (Time is displayed by the minute.)

120	↑ 90 ↑ 60		↑ 30
↑		OFF SLEEP	↑
	(Sleep timer is off.)

*The original display mode will resume about 4 seconds after the selection is made.

*The SLEEP indicator illuminates to indicate that the sleep timer is on.4 The unit will turn off automatically when the preset sleep time has passed.To confirm the sleep time setting

Press the SLEEP button once. “SLEEP” appears on the display, and soon it is replaced by the remaining time of the preset sleep time.

To change the sleep time

While the SLEEP indicator illuminates, press the SLEEP button repeatedly until the desired time appears.

To stop the sleep timer operation

Press the POWER switch, or press the SLEEP button repeatedly until “OFF SLEEP” appears on the display. (The SLEEP indicator will go out.)

To set the sleep time using front panel buttons

First press the DISPLAY button to display the current time. Within 7 seconds, press the AUTO MEMO button. Whenever the AUTO MEMO button is pressed, the sleep time changes.

Using the timer and the sleep timer at the same time1 Prepare timer playback. (See pages 40 and 41.)*Do not turn the power of this unit off after the timer setting is finished.2 Press the SLEEP button and set the sleep time.

When the sleep timer operation finishes, the timer will function to turn the source on at the preset time.

Note

Do not set the timer time so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.)

43