Manuals / Brands / Home Audio / Speaker / Yamaha / Home Audio / Speaker

Yamaha CC-70S, CC-70W Note, POWER, TIME ADJ, Receiver, TIME mode, TIMER 2-➂, ➃, For the hour:, For the minute:, ➂ At ON TIME/time setting mode, ➃ At OFF TIME/time setting mode

1 51

Download 51 pages, 4.63 Mb

HOW TO USE THE BUILT-IN TIMER

➂ At ON TIME/time setting mode

[“ON TIME” appears on the display, and soon it is

changed to a time setting mode.]

Set to the time when the timer play begins by using

the HOUR button and the MINUTE button.

➃ At OFF TIME/time setting mode

[“OFF TIME” appears on the display, and soon it is

changed to a time setting mode.]

If necessary, set to the time when you want to finish

the timer play (to turn this unit off) by using the HOUR

button and the MINUTE button. Even if you do not set

POWER

TIME ADJ

the time, it has already been set so that the timer play

Receiver

finishes after 1 hour.

* The TIMER button functions also in the time (ON

TIME or OFF TIME) setting mode.

3 If you will not use this unit until the timer play begins, turn

the power off by pressing the POWER switch or the

TIMER button.

Note

DISPLAY

TIMER 2-➂,➃

If a timer play setting is made and the power is not turned off,

the source set for the timer play will begin playing when the

time comes in place of the source played at that time.

To cancel the timer play setting

After the timer play is finished, press the DISPLAY button to

call the current time. While the current time is displayed,

press the TIMER button so that “TIMER” goes out from the

display.

If it is not canceled, the system will be turned on at the same

time every day, so it can be used as an alarm. However, if

you will be out at that time, cancel the timer play setting.

* Unless the AC supply lead is unplugged or there is a

power failure for more than 30 minutes, the time set on

the timer will be retained until it is reset.

How to make time setting in the ON TIME or OFFTIME modeFor the hour:

Press the HOUR button to change the hour to a higher value.

Press and hold to change continuously.

To change the hour to a lower value, while pressing the TIME

ADJUST button, press the HOUR button.

For the minute:

Use the MINUTE button and operate it in the same way as you did to change the hour.

41

Contents

Natural Sound Mini Component System Active Servo Technology * For U.K. and Europe models, NX-S70is optional in some areas IMPORTANT (for U.S. customers) SPECIAL NOTES FOR FCC COMPOSITE DEVICE We Want You Listening For A Lifetime INTRODUCTION For U.K. and European customers FEATURES 3-CDCarousel Auto Changer Continuous Tape Playback Capability by WARNING CD Player (CDC-S90) Disc Table Stop Button: Play/Pause Button: Disc Select Buttons Double Cassette Tape Deck (KXW-S70) DECK A Cassette Compartment DECK A Select Button and Indicator DECK B Select Button and Indicator DECK B Cassette Compartment Rear Panel of Receiver 1. Antenna Terminals and Terminals (U.K. and Europe models only) Remote Control Transmitter Window Preset Station Number Buttons A, B, C, D, E Selector Buttons VOLUME Down (–)/Up(+) Buttons Track Number Input Buttons 22.Play Button: 23.Stop Button: 24.Play Button: 25.Fast Wind Button: 26.DECK A/B Select Buttons (for KXW-S70only) Proper use of the remote control transmitter Notes concerning use REMOVING THE FRONT GRILLE (for Speaker System NX-S70only) Note PREPARATION FOR USE Placing the system Notes Antenna connection (1) Supplied FM antenna (2) Supplied AM (MW/LW) loop antenna Speaker connection Connect each speaker wire to the SPEAKERS terminals Cautions [For U.S.A., Canada, Australia and General models] NX-S70 OPEN/CLOSE THE CONTROL DOOR TURNING THE POWER ON/OFF TO THIS SYSTEM STANDBY mode SETTING THE CLOCK Changes The hour setting will not advance even if the minute advance from “59” to “00” To display the time by “second” To reset the second to “00” Volume Front panel operation Remote control operation Balance Tone CD playback 3 Place discs on the trays, label side up *Up to three discs can be loaded on the trays *8 cm (3”) discs may be played without an adaptor 4 Press the OPEN/CLOSE button to close the disc table Direct-selectionplay A. For example, to choose selection Press the “5” button B. For example, to choose selection (1)Press the “+10” button Skip search Manual search Display information during programming Playback order Selected track number Program play You can program up to 20 tracks in any desired order 2 When in the stop mode, press the PROGRAM button to prepare for programming “PROG” and 3 If necessary, select a desired disc by pressing the DISC SKIP button To stop program play •Press the stop button. The first track number programmed will be displayed To resume playback, press the play/pause To cancel a programmed sequence There are several methods as described below Repeat play modes Random play To cancel the random play Switching the time display [Example] Press the TUNER input selector button Automatic tuning 3 Press the AUTO/MAN’L button so that “AUTO TUNING” appears on the display (In this mode, stations are received in stereo or monaural automatically.) Manual tuning 1 Follow steps 1 and 2 of the Automatic tuning method Preset tuning To store stations (Example: To store a station to A1) (In this case, select area A) (In this case, select “1”.) Automatic preset tuning After the automatic preset tuning is completed Fundamental rules of internal automatic preset tuning Memory back-up operation General information DECK A select button DECK B select button Tape A or tape B playback Winding the tape Searching for the beginning of a desired selection To listen to the same selection To listen to the next selection Continuous playback 1 Load the tapes into the DECK A and DECK B cassette compartments 2 Set the reverse mode switch to 4 Press the play button to listen to side A, or the Dolby B and C Type Noise Reduction Tape playback 2 Open the cassette compartment by pressing the OPEN/CLOSE button 6 Press the play button to listen to side A, or the play button for side B Tape Counter (LINEAR COUNTER) and RESET button REMAIN indicators Dolby HX PRO Dynamic Bias Servo System Page Press the CD input selector button and load the disc to be recorded RECORDING COMPACT DISCS Tape Deck (KXW-S70) Tape Deck (KX-S90) CD synchronized recording 2 Load a tape into the cassette compartment 4 Set the reverse mode switch as desired 5 Press the REC/PAUSE button To stop recording temporarily To stop recording Recording programmed tracks Recording CD(s) on both sides of a tape automatically To cancel this function Automatic tape-editing To record a disc with the order of tracks unchanged appear on the display in turn, and next it returns to the normal display mode off → C-46 → C-54 → C-60 → C-90 CD player To cancel tape-editingfunction Follow steps 3–6 on page Selected disc Side of the tape Recording from the built-intuner 5 Set the reverse mode switch to to record on only one side, or to (or ) for continuous recording on both sides 6 Press the REC/PAUSE button *The corresponding indicator lights up and the play direction indicators flash Dubbing (by using KXW-S70only) To stop dubbing Erasing recorded tapes HOW TO USE THE BUILT-INTIMER Timer play For tuner: For tape deck: For CD player: Setting procedure: ➂ At ON TIME/time setting mode ➃ At OFF TIME/time setting mode TIME ADJ TIMER 2-➂, ➃ To cancel the timer play setting Timer recording (To record a tuner program) To confirm the timer time setting To cancel the setting of timer recording Play the desired sound source Sleep timer operation This unit can be turned off automatically OFF SLEEP (Sleep timer is off.) *The SLEEP indicator illuminates to indicate that the sleep timer is on Auxiliary (AUX) Turntable (PHONO) MAINTENANCE KXW-S70(DECK A) KXW-S70(DECK B) Headphones Internal care •Dirty heads, capstans and pinch rollers can cause poor sound and tape jams <For KX-S90 Clean these parts with a commercially available SPECIFICATIONS ■ Receiver (RX-S70) Minimum RMS Output Power per Channel 50W+50W 6 ohms, 1 kHz, 10% THD TROUBLESHOOTING ACTIVE SERVO TECHNOLOGY (for Speaker System NX-S70only)