Specifications
AUDIO SECTION
• Frequency Response |
|
2 Hz to 50 kHz | |
CD | 2 Hz to 20 kHz |
• Total Harmonic Distortion (1 kHz) |
|
0.002% or less | |
• Signal to Noise Ratio | 113 dB or more |
• Dynamic Range |
|
105 dB or more | |
CD | 100 dB or more |
• Output Level (1 kHz, 0 dB) | 2.0 ± 0.3 V |
LASER DIODE PROPERTIES
• Type |
|
Semiconductor laser (AlGaInP) | |
CD | Semiconductor laser (AlGaAs) |
• Wavelength |
|
650 nm | |
CD | 780 nm |
• Output Power |
|
5 mW (max) | |
CD | 7 mW (max) |
GENERAL
• Power Supply |
|
[U.S.A. and Canada models] | .............................. AC 120 V, 60 Hz |
[Asia and General models] |
|
AC | |
[China model] | AC 220 V, 50 Hz |
[Korea model] | AC 220 V, 60 Hz |
[Australia model] | AC 240 V, 50 Hz |
[U.K. and Europe models] | AC 230 V, 50 Hz |
• Power Consumption | 30 W |
• | 0 W |
• Dimensions (W x H x D) | 435 x 137 x 440 mm |
| |
• Weight | 15 kg (33 lbs. 1 oz.) |
* Specifications are subject to change without notice.
Taking care of this unit
When you wipe this unit, do not use chemical solvents (ex. alcohol or thinner etc.); this might damage the finish. Use a clean, dry cloth. For heavy dirt, dampen a soft cloth in detergent diluted with the water, wring it out, and then clean this unit up with the cloth.
The screws on the side panels may loosen as wood expands and contracts. In this case, tighten the screws.
