Disconnecting iPod/USB devices
Stop playback, and then disconnect your iPod or USB device. It is recommended that you press CD/USB to switch to the CD mode, confirm that the CD/USB indicator goes off, and then disconnect your iPod/USB device.
CAUTION
Do not disconnect your iPod or USB device while playing back from the connected device, or while “USB READING” appears in the front panel display.
Supported iPod/USB devices
■Supported iPod models
•iPod classic (including 120GB model)
•iPod nano (2nd, 3rd and 4th generations)
•iPod touch (1st and 2nd generations)
(as of April 2009)
Notes
•iPod is licensed on the condition that individuals perform privately duplication and playback of uncopyrighted material or material legally approved of duplication and playback. Infringement of copyright is prohibited by law.
•Yamaha and suppliers accepts no liability for the loss of data saved on iPod connected to this unit. As a precaution, it is recommended that the files are made backup copies.
■Supported USB devices
This unit supports USB mass storage class devices (e.g., flash memories, card readers or portable audio players) that use FAT16 or FAT32 format.
Notes
•Some devices may not work properly even if they meet the requirements.
•This unit does not support encrypted USB memory devices.
•Do not connect devices other than USB mass storage class devices: USB chargers, USB hubs, PCs, external HDD, etc.
•When you insert two or more memory cards at the same time into a card reader connected to the iPod/USB port on this unit, only one of the memory cards is recognized.
•Yamaha and suppliers accepts no liability for the loss of data saved on the USB devices connected to this unit. As a precaution, it is recommended that the files are made backup copies.
•Playability of and power supply to all kinds of USB devices are not guaranteed.
PLAYING BACK iPod/USB DEVICE
OPERATION
English