CONTROLS AND FUNCTIONS

D Playback Status Indicator
G Advanced setup indicator

Lights up when this unit is in the play or pause mode.

Indicates the enabled special modes. See “USING THE

E Source type indicator

ADVANCED SETUP” (page 9) for details.

 

Indicates the type of content being played back.

H Multi-information display
F Time and playback mode indicator

 

Indicates the current playback mode and the status of the

 

time display (see pages 5 and 5 for playback modes, and

 

page 5 for time display).

 

Rear panel connections

CAUTION

Before making any connection, switch OFF the power to the unit, the amplifier and any other component.

INTRODUCTION

cable

digital Coaxial

(supplied) cable Audio

cable digital Optical

Connect the supplied power cable into the AC IN inlet on the rear panel when all connections are complete, and then plug in the power cable to the AC outlet.

The audio signals are only output from the ANALOG OUT jacks when the PURE DIRECT mode is on.

Amplifier

■VOLTAGE SELECTOR
(Asia and General models only)

CAUTION

The VOLTAGE SELECTOR on the rear panel of this unit must be set for your local voltage BEFORE plugging the power cable into the AC wall outlet. Improper setting of the VOLTAGE SELECTOR may cause damage to this unit and create a potential fire hazard.

Rotate the VOLTAGE SELECTOR clockwise or counterclockwise to the correct position using a straight slot screwdriver.

Voltages are as follows:

...............AC 110/120/220/230-240 V, 50/60 Hz

230-

Voltage indication

240V

 

VOLTAGE

SELECTOR

English

3 En