CD SYNCHRONIZED RECORDING
This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely.
This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.)
*This unit and the tape deck must be placed close to each other so that they can receive the signals from this unit’s remote control transmitter at the same time.
1 
4
3
1 2 3 MODE
4 5 6 +10
7 8 9 0
DISC SKIP
| DISC |
|
| SCAN |
|
SKIP | PAUSE | PLAY |
SEARCH | INDEX | STOP |
| – OUTPUT LEVEL + | |
SYNCHRO |
|
|
4
5
1 Select the disc.
DISC SKIP
2 Load a tape on the tape deck.
*To record from the beginning of the tape, rewind the tape to the full end of the supply reel.
3
SYNCHRO
This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.
*In this mode, the time display on this unit flashes on and off.
4 If necessary, select the desired track.
SKIP
4
or
5
PLAY
Both CD play and tape deck recording begin.
* CD play begins a little later than recording
Notes
●To finish or stop the recording, make proper operations on the tape deck.
●Programmed sequence of tracks can also be recorded with this function, instead of recording an entire disc.
(Refer to page 11 for the programming procedure.)
14