Yamaha CDC-98 LOADING DISCS/DISC PLAY, DISC, PLAY, DISC, Note, Notes, RANDOM, DISC SKIP, DISC SKIP, DISC SKIP, OPEN/CLOSE, “ALL” mode:, PLAYXCHANGE, PLAYXCHANGE

DISC SKIP

LOADING DISCS/DISC PLAY

6 6 2, 4

1 3, 6

5

1 POWER

5 Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display.

MODE

2

Label side upward

Shows the selected disc mode.

OPEN/CLOSE

Disc tray

3

DISC SKIP

Load the fifth disc.

4 OPEN/CLOSE

“SINGLE” mode: The unit will play a designated disc only.

“ALL” mode: The unit will play all discs in the tray in sequence.

6 PLAY

* If necessary, select a desired disc by using a DISC-select button or the DISC SKIP buttons.

		DISC
1	2		4	5
		3

PLAY

Notes PLAYXCHANGE

●After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP buttons, the display shows the total number of tracks and the total recorded time of the disc to be played for a few seconds.

●Additionally, you can close the disc tray by pressing the PLAY button, a DISC-select button, a numeric button (on the remote control transmitter) or the RANDOM button, or by pressing the front edge of the disc tray gently. If the tray is closed in these

ways, play will begin automatically, however, the display will not show the total number of tracks and the total recorded time

6 of the first disc to be played.

During play, you can open the disc tray by pressing the PLAYXCHANGE button without interrupting disc play. However, in this case, pressing the DISC SKIP buttons has no effect.

Note

You can load or replace discs on the trays when the disc tray is opening, however, never load a disc on the tray hidden inside the unit. In doing so, the disc and the unit may be damaged, because the tray already has a disc, which is being played.