Yamaha CDC-98 To stop play temporarily, To stop play completely, To play a desired track on the disc, PLAY, PAUSE, SKIP PLAY, DIRECT PLAY, OUTPUT LEVEL

To stop play temporarily

PAUSE

To stop play completely

STOP

*To resume play, press the PAUSE button again or the PLAY button.

To play a desired track on the disc

DIRECT PLAY

Select a desired track by using the numeric buttons on the remote control transmitter.

5

The selected track number is displayed.

SKIP PLAY

●To play from the beginning of the track following the one now playing

SKIP

●To play from the beginning of the track now playing

SKIP

Example: To select track 25

Press ➀ twice, then immediately press ➁ once.

10 5

➀➁

*If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.

●To play from the beginning of the track before the one now playing

SKIP

(twice)

*These operations can also be performed when the unit is in the pause or stop mode.

Display information at disc play					➀ Encloses the tray number of the selected disc.
					➁ Shows the tray numbers with discs.
	➀	➁	➂	➃	➂ Shows the selected track number.
					➃ Shows the time displays. (Refer to “Selecting time
					displays” on page 9.)
					➄ Displays the numbers that correspond to the numbers of
					the tracks (as high as number 15) on the disc. After each
					track is played, its corresponding number disappears so
					the number of remaining tracks (and their numbers) can be
					seen at a glance.
		➄		➅	➅ Shows the level of signals output into an amplifier adjusted
					by using the OUTPUT LEVEL buttons.

7