RELAY PLAY
If you have two
Connections
Never plug in these units or other components until all connections are completed.
First, set the 2nd/MAIN switch of the unit connected to an amplifier to MAIN and the 2nd/MAIN switch of the other unit to 2nd. After completing the connections as shown below, connect the power cords of both units to the AC outlet.
L
To amplifier 
R
|
| Main unit |
|
|
LINE OUT | RELAY PLAY |
|
|
|
| 2nd CHANGER |
|
|
|
1 | INPUT |
|
|
|
|
|
|
| |
|
| CONTROL |
|
|
| 2nd MAIN | AUDIO | LINE OUT | 2nd CHANGER |
|
| DIGITAL | RELAY PLAY | |
|
| OUT |
| INPUT |
|
| OPTICAL |
| CONTROL |
|
|
|
| 2nd MAIN |
Set to “MAIN”.
R | L |
|
|
|
|
| Remote control cable (sold separately) |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| 2nd unit |
|
|
LINE OUT | RELAY PLAY |
|
|
|
| 2nd CHANGER |
|
|
|
1 | INPUT |
|
|
|
|
|
|
| |
|
| CONTROL |
|
|
| 2nd MAIN | AUDIO | LINE OUT | 2nd CHANGER |
|
| DIGITAL | RELAY PLAY | |
|
| OUT |
| INPUT |
|
| OPTICAL |
| CONTROL |
2nd MAIN
Set to “2nd”.
After completing the connections, press the STANDBY/ON buttons of both units to turn the power on. “ACTIVE” appears in the display of the main unit, ”INACTIVE” appears in the display of the second unit. Relay play (switching between both units) takes effect according to the selected play mode.
Notes
•The 2nd/MAIN switch should be set before plugging into the AC outlet.
•If relay play is not needed and each unit is used separately, the 2nd/MAIN switch on the rear panel of each unit should be set to the “MAIN” position.
21