CAUTION: READ THIS BEFORE OPERATING YOUR UNIT

1To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.

2Install your unit in a cool, dry, clean place, and in a horizontal and stable position – away from windows, heat sources, vibration, dust, moisture, or cold. To avoid humming sounds, locate the unit away from other electrical appliances, motors, and transformers. To prevent fire or electrical shock, do not expose to rain and water.

3Do not operate the unit upside-down. It may overheat, possibly causing damage.

4Do not put anything other than discs in the unit. If any foreign object should fall into the unit, contact your dealer.

5Do not use force on switches, knobs or cords.

6Do not clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.

7Be sure to read the “TROUBLESHOOTING” section on common operating errors before concluding that your unit is faulty.

8Do not place another component on top of this unit, as damage or discoloration on the surface of the unit may result.

9To prevent damage by lightning, disconnect the power cord from the AC outlet during an electrical storm.

10When disconnecting the power cord from the AC outlet, grasp the plug; do not pull the cord.

This unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off. This state is called the standby mode. In this state, this unit is designed to consume a very small quantity of power.

CAUTION FOR CARRYING THIS UNIT

When you carry the unit:

1Press STANDBY/ON and make sure “STANDBY” disappears from the display.

2Remove all CDs from the unit.

3Disconnect the power cord from the AC outlet.

WARNING

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

DANGER

Invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CAUTION (FOR CANADA MODEL)

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.

FOR CANADIAN CUSTOMER

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS.

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.

DANGER: The use of optical instrument with this product will increase eye hazard.

Laser Diode Properties

•Material: GaAlAs

•Wavelength: 780 nm

•Emission Duration: continuous

•Laser Output: max. 44.6 µW*

*This output is the value measured at a distance of about 200 mm from the objective lens surface on the Optical Pick- up Block.

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

Compliance with FCC regulations does not guarantee that

This product, when installed as indicated in the instructions

interference will not occur in all installations. If this product is found

to be the source of interference, which can be determined by

contained in this manual, meets FCC requirements.

turning the unit “OFF” and “ON”, please try to eliminate the problem

Modifications not expressly approved by Yamaha may void your

by using one of the following measures:

authority, granted by the FCC, to use the product.

 

2. IMPORTANT: When connecting this product to accessories and/

Relocate either this product or the device that is being affected by

the interference.

or another product use only high quality shielded cables. Cable/

 

s supplied with this product MUST be used. Follow all

Utilize power outlets that are on different branch (circuit breaker or

installation instructions. Failure to follow instructions could void

fuse) circuits or install AC line filter/s.

your FCC authorization to use this product in the USA.

In the case of radio or TV interference, relocate/reorient the

3. NOTE: This product has been tested and found to comply with

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

the requirements listed in FCC Regulations, Part 15 for Class

lead-in to coaxial type cable.

“B” digital devices. Compliance with these requirements

If these corrective measures do not produce satisfactory results,

provides a reasonable level of assurance that your use of this

product in a residential environment will not result in harmful

please contact the local retailer authorized to distribute this type of

interference with other electronic devices.

product. If you can not locate the appropriate retailer, please

This equipment generates/uses radio frequencies and, if not

contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave,

Buena Park, CA 90620.

installed and used according to the instructions found in the

The above statements apply ONLY to those products distributed by

users manual, may cause interference harmful to the operation

of other electronic devices.

Yamaha Corporation of America or its subsidiaries.

3