CONNECTIONS

Connecting a monitor

You can display the list of groups or tracks to be played, copying/recording settings or the list of setting items on the monitor by connecting the monitor to this unit. Connect the S VIDEO jack or the VIDEO jack whichever available on your monitor.

Connecting the power cable

[U.S.A. model]

Plug the power cable into the AC inlet when all connections are complete, and then plug in the power cable to the wall outlet.

[Europe, U.K. and Australia models]

Plug in this unit to the wall outlet when all connections are complete.

1

STARTED GETTING

PREPARING THE REMOTE CONTROL

■Installing batteries

1. Press the hook (h) of the battery cover to remove it.

2. Insert 2 batteries (AA, UM-3 or R6 type) according to the polarity markings on the inside of the battery compartment.

3. Close the cover until it snaps into place.

Battery replacement

If you find that the remote control must be used closer to this unit than usual, the batteries are weak. Replace both batteries with new ones.

Notes on batteries

•Use only AA, UM-3, or R6 type batteries for replacement.

•Do not mix a new battery with a used one.

•A rechargeable battery cannot be used.

•Do not mix different types of battery.

•Do not attempt to short out the batteries by directly connecting the plus (+) and the minus (–) with a piece of metal.

•Remove the batteries if the remote control will not be used for an extended period of time.

•If the batteries leak, dispose of them immediately, taking care not to touch the battery fluid. If the battery fluid comes into contact with your eyes, mouth, or skin, rinse it off with water immediately, and consult a doctor. Clean the battery compartment thoroughly before installing new batteries.

■Remote control operation range

NATURAL SOUND HDD/CD RECORDER

Remote control sensor

Within 6m (20’)

30

°

°

30

Notes

•If operation of this unit by the remote control creates any malfunction in any other components, change the placement of the component.

•Do not spill any liquid on or drop the remote control. Do not place it near a heater or in the bathroom where the temperature and humidity become high.

•Make sure the remote control sensor is not exposed to direct sunlight or strong lights. If it is, it may not function correctly.

11

English