Yamaha CDR400At Installing the CDR400At drive

Chapter 2 - Installing the Yamaha CDR400At Drive

Installing the CDR400At drive

The following steps will differ slightly depending on the type of computer you are using. For details on removing the cover from your computer, and installing or removing internal devices, refer to the manual for your computer.

1.Switch off your computer, and unplug it from the AC outlet.

If you fail to do this, there is a danger of electric shock and/or of causing short circuits, which may damage the computer and/or CDR400At drive.

PUSH

2.Remove the cover from your computer.

Be careful not to lose the screws that were removed.

3.Your hands or body may be holding a charge of static elec- tricity. Touch a metallic portion of the chassis or power sup- ply to release any such charge.

8