To stop program play

Press the STOP button. The first programmed track number will be displayed.

To resume play, press the PLAY button. Play will begin from the beginning of the program.

To check program data

1.Press the STOP button to stop the program play.

2.Press the PROG button.

3.Press the SKIP button. Each time you press this button, the track number and the program number is displayed in the order of the program. When you want to

check the preceding tracks, press the SKIP button.

To correct program data

1.Follow the procedure described in “To check program data.”

2.Display the track number to be corrected by pressing the SKIP button.

3.Press a number button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed.

4.After the correction has been completed, press the PROG button or the PLAY button.

To cancel a program sequence

There are three methods, as described below.

•Press the STOP button or the CLEAR button while the unit is stopped.

•Open the disc tray.

•Switch off the power.

INDEX SEARCH

If the disc includes index numbers, play can be started from any desired index number.

 

SYNCHRO

DIMMER

TIME

OPEN/

 

 

CLOSE

 

 

SPACE PEAK

TAPE

CLEAR

PROG

2

 

1

2

3

INDEX

1, 3

 

 

 

7

8

9

0

 

4

5

6

+I0

 

 

REPEAT RANDOM

 

 

 

 

SEARCH

 

 

– OUTPUT LEVEL +

SKIP

 

 

 

STOP

PAUSE

PLAY

 

 

1 Select a track which has index numbers.

5

2

INDEX

INDEX

1 2 3 4 5 6 7 8 9 10 11 12

3 Select the desired index number.

To cancel the index search function

Press the INDEX button.

Notes

•Not all discs have index numbers. The index system is a method for sub-dividing tracks into smaller divisions (for example, the movements within classical symphonies) for easier location of those parts. The liner notes with the disc usually tell if such index numbers are included.

•If an index number is selected that is higher than any index number on that disc, play will start from the last index number point on the disc.

•For some discs, play may begin slightly prior to the actual designated index point.

•If the disc has no encoded index points, play will begin from the start of the selected track.

•The index number can be designated only while the INDEX number display is illuminated.

6

14