LAutomatic Random Program tape recording
The unit can automatically program tracks in random order for recording to tape.
English
| SYNCHRO | DIMMER | TIME | OPEN/ |
|
| CLOSE |
| |||
| SPACE PEAK | TAPE | CLEAR | PROG |
|
| 1 | 2 | 3 | INDEX |
|
|
|
|
|
| |
| 4 | 5 | 6 | +I0 |
|
| 7 | 8 | 9 | 0 | 2 |
4 |
| REPEAT RANDOM | |||
|
| SEARCH |
| ||
– OUTPUT LEVEL + | SKIP |
|
| ||
| STOP | PAUSE | PLAY |
| 3, 4 |
|
|
|
|
| |
1 Follow steps 1 – 4 on page 15.
2
RANDOM
The unit will automatically program tracks for side A and side B separately considering the tape’s total time.
3 Begin recording on the tape deck and at the same time, press the PLAY button on this unit.
4 The unit will pause at the end of side A of the tape. Turn the tape over to side B. Resume recording and, at the same time, press the PLAY or PAUSE button on this unit.
Notes
•Because the programmed data changes every time the RANDOM button is pressed, the amount of time remaining at the end of the tape also changes accordingly.
•If the tape’s length is not enough, not all tracks can be programmed. In this case, exchange the tape for a longer one.
•In step 2, you can check the program data for side A and side B.
PROGRAM
A
TOTAL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1The total number of programmed tracks of each side appears momentarily when the automatic programming is finished. Then the first programmed track number for side
A reappears.
2Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
• To check, cancel or correct program data, refer to page 14.
*In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
•You can use “CD SYNCHRONIZED RECORDING” if your tape deck has this function. In step 3 and 4, press the SYNCHRO button then press the PLAY button on this unit’s remote control transmitter. Recording automatically begins (for details, refer to page 19.)
17