Changing brightness of the display
CDX-880, CDX-580
You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.
During play | During stopped or paused |
Normal illumination
Dim
“OFF”
*While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel is illuminated.
DIMMER
AUTO
DISPLAY OFF
Normal illumination
Dim
Dim
(The AUTO DISPLAY OFF indicator lights up. In this state, if a disc is played, the display illumination will be turned off.)
CDX-480
If desired, you can change brightness of the display in three degrees by pressing the DIMMER button.
Normal illumination
DIMMER
Slightly dim
Dim
When you listen with headphones
Connect the headphones to the PHONES jack and adjust the volume by using the OUTPUT LEVEL buttons. At that time, note that this adjustment will also vary the signal level output to the amplifier.
CDX-880 only
*If the FIXED (LINE OUT) terminals on the rear of this unit are connected to the amplifier etc., the use of the OUTPUT LEVEL buttons does not vary the signal level output to the amplifier.
PHONES
– OUTPUT LEVEL +
Open/close the control door CDX-880 only
When it is not necessary to operate controls inside the control door, close the door.
To close the door | To open the door |
11