Yamaha CD SYNCHRONIZED RECORDING

CD SYNCHRONIZED RECORDING

This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely.

This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.)

* This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s remote control transmitter at the same time.

1	OPEN/CLOSE		DIMMER	TIME
	PROG	TAPE	CLEAR	PEAK
	SPACE	S/F		RANDOM
			REPEAT
	1	2	3	+10	4
	4	5	6
	7	8	9	0
4	SKIP		PAUSE	PLAY	5
	SEARCH		INDEX	STOP
3			– OUTPUT LEVEL +
		SYNCHRO
1 Load the disc.				4 If necessary, select the desired track.
OPEN/CLOSE					SKIP
					5
					or

2 Load a tape on the tape deck.		5
		PLAY
* The peak level searching function of this unit is useful
for adjusting recording level on the tape deck. (Refer
to page 18.)
3		Both CD play and tape deck recording begin.
		* CD play begins a little later than recording.
SYNCHRO		6 If you want to stop recording temporarily and restart
		recording from a desired track, follow steps 3–5 again.
	To cancel this function
This unit enters into the pause mode, and the tape deck	Press the STOP button.
enters into the REC/PAUSE mode.	Notes
* In this mode, the time display on this unit flashes on and
	•	To finish or stop the recording, make proper operations on
off.
	•	the tape deck.
		Programmed sequence of tracks can also be recorded with
		this function, instead of recording an entire disc. (Refer to
		page 13–14 for the programming procedure.)
	•	This function can also be used together with the automatic
		tape-programming function. (Refer to page 15–17.)

19